manualshive.com logo in svg

Bang & Olufsen BeoCenter 6-26, Service Manual

Share
Download
Bang & Olufsen BeoCenter 6-26 Service Manual Download Page 31

Adjustments and Repair tips     3.

Adjustments and Repair tips

Adjustments described   ......................................................................  3.2
Purpose of Adjustments   ....................................................................  3.2
General considerations   .....................................................................  3.2
Access to Service Mode   ....................................................................  3.3
Adjust Tuner takeover, IF adjust and FM sound adjust  ........................  3.3
Stand (Only TV with motorised stand)   ...............................................  3.3
Geometry adjustment   .......................................................................  3.4
Geometry specifications   ....................................................................  3.4
Format  - 6:9 Panorama   ................................................................  3.4
Format  - 5:9   ................................................................................  3.4
Format  - 4:3   ..................................................................................  3.5
Format 2 - 6:9 Letterbox   .................................................................  3.5
Format 3 - Real 6:9   .........................................................................  3.5
Picture adjustments   ..........................................................................  3.5
ServiceTool   ........................................................................................  3.7
Considerations before connecting  ServiceTool to the product   ...........  3.7
Contents in ServiceTool   .....................................................................  3.7
ServiceTool functions   ........................................................................  3.7
Ignore mode   .....................................................................................  3.8
Replacement of PCB6 Main microcomputer   ......................................  3.8
Testing a Main microcomputer PCB6   .................................................  3.8
Heat regulation   .................................................................................  3.9
Final check after repair   ......................................................................  3.9
Insulation test   ...................................................................................  3.9
Monitor information   .........................................................................  3.9
Customer setup   ..............................................................................  3.0
Clean the product   ...........................................................................  3.0
PIN-code   .........................................................................................  3.0

ABO-CENTER 

v/HENRIKSENS 

ELEKTRONIK

Summary of Contents for BeoCenter 6-26









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands