Bang & Olufsen Beo4, Reference Manual

Page: 9 / 21

11
GO 3
Add an extra “button” to Beo4
You can add extra “buttons” to Beo4 which
can then be used on a daily basis. When you
add a “button”, you can chose to place your
new “button” – somewhere in-between, on its
preset position or at the top*.
When the “button” you want is displayed,
then add the “button” and choose where you
want it. The next time you press LIST on Beo4,
the new “button” will appear in the display.
*Note: The “button” you add will only be
placed at the top of the list if you have already
added another “button” and placed it in a
specific position, or if you have used the move
facility in the Beo4 setup function.
To be able to add extra “buttons”…
Press and hold the standby button
down
Press LIST to get access to the special
Beo4 setup function
Now, let go of both buttons…
ADD
? appears in the display…
Press GO to call up the list of
“buttons” you want to add from
The first “button” appears in the
display, it flashes on and off…
Press LIST until the “button” you
want to add is displayed
Or, press any of the control buttons,
▲ ▼
or
ss tt
to move forwards or backwards in
the list of all extra “buttons”…
Press GO to add and place it on its
preset position or as the first
“button”in the list of your extra
“buttons”
Or…
Press a number key e.g. 3 to insert
the added “button” on a specific
position in the list of your extra
“buttons”
When ADDED appears in the display, the button”
has been added and you then leave the Beo4
setup automatically…
LIST
GO
then
GO
then
•
then
LIST
then
3