BandRich BandLuxe M250, User Manual

Page: 6 / 18

1.2 Features
1.2.1 WCDMA
y
FDD 850/1900/2100 MHz
y
Power Class 3 (+24dBm)
y
WCDMA 384/384 kbps downlink/uplink modem operation
y
HSUPA 2Mbps uplink modem operation (SW upgradable to 5.7Mbps)
y
HSDPA 7.2Mbps downlink modem operation
y
Supports UL and DL Compressed Modes
y
Supports Circuit and Packet-Switched Data
y
M250V supports 3G voice call via PCM interface
1.2.2 E-GPRS
y
850/900/1800/1900 MHz
y
GSM Power Class 4 (2W) for 850/900 bands
y
GSM Power Class 1 (1W) for 1800/1900 bands
y
EDGE class E2 (+27 dBm in 850/900 bands, +26 dBm in 1800/1900 bands)
y
GPRS/EGPRS Multislot Class 12 (4 slots Rx, 4 slots Tx, 5 slots active max)
y
GPRS/EGPRS Class B Type 1 MT
y
GPRS CS1-CS4; EGPRS MCS1-MCS9
y
Circuit Switched Data: 14.4 and 9.6 kbps
y
M250V supports GSM voice call via PCM interface
1.2.3 GPS
y
High-sensitivity GPS that integrated in Qualcomm gpsOne solution.
y
High availability that is enabled by using both satellite and network information.
y
The GPS RF path is shared with the UMTS Receive Diversity RF path. When the GPS
functionality is enabled, the UMTS Receive Diversity will be disabled.
1.2.4 Baseband Functionality
The M250 module interfaces with host device through PCI Express Mini Card interface. The
interface equips with USB2.0 interface, USIM interface, LED control signal, Wake# signal to request
host device return from sleep/suspended state, and W_Disable# signal to disable radio operation.
There are several GPIO pins (2.6V compatible) reserved for customized applications, please contact
BandRich for discussion. Besides the above mentioned interfaces, M250V also provides PCM
interfaces reserved for voice applications. The M250-LC features low power consumption but
requires higher input voltage than PCI standard.
1.2.5 Software Functionality
M250 module series is supplied with device driver of Microsoft Windows Vista 32/64, Windows XP
SP2 above, Windows 2000 SP4 above, Mac OSX 10.4 above, and Linux Fedora 8, Unbuntu 7, Open
SuSE 10.