BandRich BandLuxe M250, User Manual

Page: 14 / 18

2
AT Command Command description Command Format
AT+CFUN Full functionality mode AT+CFUN=<mode>[,<rst>]
AT+CFUN?
AT+CFUN=?
AT+GCAP Request complete TA capabilities
list AT+GCAP
AT+GCAP=?
AT+CSCS Used Character Set AT+CSCS=[<chset>]
AT+CSCS?
AT+CSCS=?
AT+CEER Cause Location ID for the extended
error report AT+CEER
AT+CMEE Report Mobile Terminal Error AT+CMEE=[<n>]
AT+CMEE?
AT+CMEE=?
AT+CGDCONT Define PDP Context AT+CGDCONT=[<cid> [,<PDP_type> [,<APN>
[,<PDP_addr> [,<d_comp> ,<h_comp>]]]]]]
AT+CGDCONT?
AT+CGDCONT=?
AT+CGDSCONT Define Secondary PDP Context AT+CGDSCONT=[<cid>,<p_cid>[,<d_comp>[,<h_comp>]]]
AT+CGDSCONT?
AT+CGDSCONT=?
AT+CGTFT Traffic Flow Template AT+CGTFT=[<cid>, [<packet filter identifier>,
<evaluation precedence index>
[,<source address and subnet mask>
[,<protocol number (ipv4) / next header (ipv6)>
[,<destination port range> [,<source port range>
[,<ipsec security parameter index (spi)>
[,<type of service (tos) (ipv4) and mask /
traffic class (ipv6) and mask>
[,<flow label (ipv6)> ]]]]]]]]]
AT+CGTFT?
AT+CGTFT=?
AT+CGEQREQ 3G Quality of Service Profile
(Requested)
AT+CGEQREQ=[<cid> [,<Traffic class>
[,<Maximum bitrate UL>
[,<Maximum bitrate DL>
[,<Guaranteed bitrate UL>
[,<Guaranteed bitrate DL>
[,<Delivery order>
[,<Maximum SDU size>
[,<SDU error ratio>
[,<Residual bit error ratio>
[,<Delivery of erroneous SDUs>
[,<Transfer delay>
[,<Traffic handling priority>
[,<Source statistics descriptor>
[,<Signalling indication>]]]]]]]]]]]]]]]
AT+CGEQREQ?
AT+CGEQREQ=?