BandRich BandLuxe M250, User Manual

Page: 13 / 18

Section 3 AT Command Set Reference
Table B-1 lists the standard AT command that are implemented in BandLuxe M250 module series.
For detail command usage and possible response, please check 3GPP TS 27.007, AT command set for
User Equipment (UE).
Table B-1 Abbreviations and Acronyms Table
BandLuxe HSPA Modem AT Command Interface API
Serial Port Name: BandLuxe AT CMD Interface
AT Command Command description Command Format
AT&F Set all current parameters to manufacturer defaults AT&F[<mode>]
AT&V Display current configuration AT&V[<mode>]
ATE Enable command echo ATE
ATI Display product identification information ATI
ATQ Set result code presentation mode ATQ[<value>]
ATV Set result code format mode ATV[<value>]
ATZ Set all current parameters to user defined profile ATZ[<mode>]
ATS3 Write command line termination character S3=<n>
S3?
S3=?
ATS4 Set response formatting character S4=<n>
S4?
S4=?
ATS5 Write command line editing character S5=<n>
S5?
S5=?
AT+GMI Request manufacturer identification AT+GMI
AT+GMM Request model identification AT+GMM
AT+GMR Request revision identification of software status AT+GMR
AT+GSN Request serial number identification AT+GSN
AT+GCAP Request complete TA capabilities list AT+GCAP
AT+GCAP?
AT+CBST Select bearer service type AT+CBST=[<speed>[, <name>[, <ce>]]]
AT+CBST?
AT+CBST=?
AT+CRLP Select radio link protocol param AT+CRLP=[<iws>[, <mws>[, <T1>[, <N2>]]]]
AT+CRLP?
AT+CRLP=?
AT+CREG Network registration AT+CREG=[<n>]
AT+CREG?
AT+CREG=?
AT+CGREG GPRS network registration status AT+CGREG=[<n>]
AT+CGREG?
AT+CGREG=?