B&R PROVIT 4000, User Manual

Page: 40 / 100

4 0
4.2.10 TOUCH SCREEN INFORMATION
The display unit is delivered complete with the respective driver for the operation of the Touch Screen.
According to the revision of the display unit, either a Dynapro or Elotouch touch screen is used.
If a display unit with an integrated touch screen is used, the COM2 interface is no longer at your disposal!
This interface is automatically reserved internally for the operation of the touch screen .
Setting Up the Touch Screen for the Environment:
The installation of both types of touch screens is to be carried out corresponding to the procedure described
in the user's manual. The user's manual is included with the delivery of the display unit. The installation is carried
out automatically with an "install" program.
Make sure to select the proper touch screen:
Type Touch Screen
Dynapro Dynapro-Serial
or
Dynapro-Serial not SC3
Elotouch E271-2210 Accu Touch
The touch screen is to be calibrated after successful installation (hardware calibration). This procedure is
described in the user's manual.
The calibration is carried out with the following program:
Type Program
Dynapro TBCAL
Elotouch ELOCALIB
Mouse emulation is to be loaded at the end of the calibration for the operation of the driver.
Example "autoexec.bat" file:
Type "autoexec.bat"
Dynapro
TBDRIVER 2 /c:9600,n,8,1
If a mouse is to be used parallel to the touch screen, the mouse driver "mouse" must be called with the
following entry.
TBMOUSE 1
Elotouch
ELODEV 2210,2,9600 -c.....
The calibration data is entered from ELOCALIB ("-c.....").
MONMOUSE -m5