background image

Technical data  • Introduction

Chapter 2

Technical data

Power Panel 500 user's manual V1.40

19

1.3 A complete solution with maximum flexibility

As a central operating and control system, B&R Power Panels combine control, HMI and drive technology into a

single package. From embedded processors to full PC power, this product range always delivers the ideal system

architecture for machine builders to implement cost-effective solutions.
With these systems, expansion is as easy as connecting remote I/O modules and drives via modular fieldbus

interfaces. Depending on requirements, Power Panels can be expanded with POWERLINK, CAN bus, PROFIBUS

DP or other fieldbus interfaces. This allows additional topologies to be implemented at a later date without problems.
Several distributed operating stations are often used in order to guarantee that complex machines are operated

reliably. This provides easy access for operating personnel and ensures that process information is available on

the machine where it is needed.

1.4 Open system platform

In addition to enabling the implementation of complete automation solutions, Power Panel systems are also an

optimal platform for open operating systems. This provides users with the highest degree of flexibility because it

allows different software architectures to be implemented on the same system platform.
Regardless of whether they are used to automate complete systems, as intelligent visualization terminals or to-

gether with open PC operating systems, the Power Panel series offers the right tool for any situation. The result

is a complete solution with maximum flexibility.

1.5 Features

Intel

®

 Atom™ Z510, Z520 or Z530 processor

Up to 2 GB SDRAM

5.7" VGA up to 15" XGA displays

2x USB 2.0 (5.7" and 7" devices), 3x USB 2.0 (10.4", 12.1" and 15" devices)

1x RS232

1x Ethernet 10/100/1000 Mbit/s

Optional interface and I/O boards

1 CompactFlash slot (type I)

24 VDC supply voltage

Operation without a fan or heat sink

BIOS (Insyde)

Real-time clock (RTC, battery-backed)

Summary of Contents for Power Panel 500 Series
































































































































































































































































































































Reviews: