B&R MAPRV4000-E, User Manual

Page: 51 / 100

5 1
4.3.19 JUMPER
The jumpers are used for interface, drive and the display settings. There are two different jumper configurations
dependent on the controller revision:
- Controller Rev. < 10.xx
- Controller Rev.
≥
10.xx
Jumper configuration for controllers with a rev. < 10.xx:
Seven rows of jumpers can be found on the top edge of the I/O board. The housing cover has to be removed
to access the jumpers. The cover can be removed by loosening the two screws shown below.
Remove Screws
The jumpers are described in the table on the next page. The jumpers are oriented as shown below.
1.1
1.2
1.3
1.4
1.5 2.1
2.2
2.3
2.4 4.1
4.2
4.3 5.1
5.2
5.3 3.1
3.2 6.1
6.2
7.1
7.2
7.3
7.4
7.5
7.6
Video BIOS
Reserve Jumper 7.1 to 7.6