Installation and connection • Connecting and disconnecting the motor
Chapter 5 Installation
and connection
8JSA user's manual V1.00
81
Separate connections for motor and encoder
Connecting
1. Disconnect the machine from the power system and secure
it against being switched on again.
2. Connect the cable to the drive system (ACOPOS).
3. Connect the power connector to the motor.
4. Connect the encoder connector to the motor.
Disconnecting
1. Disconnect the machine from the power system and secure
it against being switched on again.
2. Disconnect the encoder connector from the motor.
3. Disconnect the power connector from the motor.
4. Disconnect the cable from the drive system (ACOPOS).
5.3 Connecting connectors properly
The power and encoder connectors are available in different variants.
Caution!
Damage due to improper connector installation!
Incorrectly attached connectors can lead to malfunctions and damage to the motor and encoder!
•
Always attach the connectors without excessive force or the use of tools.
•
Make sure that the connectors are fully attached and locked if necessary.
5.3.1 speedtec system
The speedtec system has a tool-free quick-release fastener. During installation, make sure that the connectors
are tightly connected and locked.
In addition to the quick-release fastener, the speedtec connector also has internal threads, making it compatible
with built-in connectors that use a screw connection.