B&R 6PPT30.043F-20B User Manual Download Page 50

Page: 50 / 140

Commissioning • Instructions for use in Ex zone 2 / 22

Power Panel T30 User's manual V1.42 - Translation of the original documentation

Conformity test and certification

Devices marked "Ex" satisfy the requirements set forth in directives 2014/34/EU as well as the harmonized stan-

dards (EN 60079-0:2012+A11:2013, EN 60079-15:2010, EN 60079-31:2014).

Danger!

Explosion hazard!
The USB interface – if it is not permanently connected – is only permitted to be used for maintenance

work, setup or programming in non-hazardous environments. Continual use in explosive atmospheres

is only permitted when sufficient strain relief is implemented.

Danger!

Explosion hazard!
Exchanging components is prohibited.

Danger!

Explosion hazard!
Do not disconnect plugs with power applied or only in safe locations.

The instructions in this section, including details regarding ATEX approval, can also be found on the information

sheet delivered with the device.

Summary of Contents for 6PPT30.043F-20B













































































































































Search results

Summary of Contents for 6PPT30.043F-20B

Reviews:

Related manuals for 6PPT30.043F-20B

Brands by name

Popular brands

B&R 6PPT30.043F-20B, User Manual

Search results

Summary of Contents for 6PPT30.043F-20B

Reviews:

Related manuals for 6PPT30.043F-20B

Brands by name

Popular brands