manualshive.com logo in svg

B&R Industrial Automation GmbH Power Panel 65, User Manual

Share
Download
B&R Industrial Automation GmbH Power Panel 65 User Manual Download Page 7

 General information  • Manual history

Power Panel 65  User's manual V2.21

7

1 General information

Information:

B&R makes every effort to keep user's manuals as current as possible. If there is a newer version

available, it can be downloaded as a PDF file from the B&R website at 

www.br-automation.com

.

1.1 Manual history

Version

Date

Comment

2.21

December 2016

The following changes were made:

•

Added I/O mapping to chapter "Interface modules".

•

Updated technical data (detailed specifications for certifications).

•

Editorial corrections.

2.20

April 2016

Updated chapters "Power Panel" and "Interface modules".

2.10

October 2014

Updated chapter "Accessories".

2.00

February 2014

Updated the following chapters:

•

Technical data in chapter 2 "Power Panel 65"

•

Technical data in chapter 3 "PP65 interface modules"

•

Chapter 5 "Standards and certifications"

•

Chapter 6 "Accessories"

1.00

May 2011

First edition.

Summary of Contents for Power Panel 65

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands