Product Overview
4
Hardware Overview
1
Power
Power LED will remain lit while power is applied.
2
Signal strength
Indicate receive signal strength. The Signal
Strength LEDs are only used at the power on to
assist the installation.
The CPE will turn off all the Signal Strength LEDs after a timer
expires from power on. Such design is to prevent the outdoor CPE
becoming a potential target particularly at night. The default time is
60 minutes however, is user settable in the web GUI.
3
Mount base
Attach the mount bracket.
4
Earth ground
terminal
Use a spring washer and an M4x8L screw to
ground and protect CPE from lightning. See
” on page 16 for more details.
5
Ethernet port
Connect to a computer/ Passive PoE using an
Ethernet cable.
6
Reset button
Short press to restart the device.
Long press for 10 seconds to reset the
settings to the factory default settings.
7
SIM card slot
Insert the SIM card.
8
USB port
For use by technicians use only.
