Surround Modes (cont.)
'9'
352 /2*,&
DVD Source
Composite Video
DVD PCM 2.0
Pro Logic
step to desired mode
(MODE)
MODE
Action
From Front Panel
From Remote
Note: your A/V System Controller keeps track of a surround mode for each of the sources. It would be possible, for
example, to have your DVD player set to SURROUND while your CD player is set to STEREO. All you need to do
is change sources and the surround mode you last used for that source will be recalled. HEADPHONE mode,
unlike the other surround modes, applies to all sources. This allows you to change sources while remaining in
HEADPHONE mode. When you leave HEADPHONE mode, each source will return to the SURROUND mode that
was previously active for that source.
Why do I need all these modes?
Many people will be happy leaving their A/V System Controller in SURROUND mode all the time. Your A/V System
Controller will automatically switch back and forth between Dolby Pro Logic, Dolby Digital and DTS (Reference 20
only). Stereo material will be played back with Pro Logic decoding. ProLogic’s extraction of mono information to
the center channel works just as well on stereo (non-ProLogic encoded) material and may provide improved
imaging, especially when sitting away from the “sweet spot” in the center of your speakers. Only Dolby Pro Logic
encoded 2-channel material has true rear speaker information. However, ProLogic’s rear speaker processing may
provide a pleasing ambiance effect on many stereo (non-ProLogic) soundtracks. You can turn off center channel
processing by using STEREO HALL mode, you can turn off rear channel processing by using 3 STEREO mode, or
you can turn off both center and rear processing by using STEREO mode.
STEREO F/R (Front/Rear) mode puts you in the orchestra instead of in front of it. Some people prefer this mode
for all their stereo listening. It may also be useful when you have a large group where it is difficult to put everyone
near the optimum listening position.
STEREO Lt Rt (Right total Left total) is provided for making Pro Logic compatible analog recordings from all
sources including Dolby Digital and DTS. Your tape outputs contain the same audio information as your left and
right front speaker outputs. If you make a tape in a normal listening mode such as SURROUND then the center
and rear information will not appear on the tape. Since the center channel contains much of the dialog for movies,
the tape will be almost useless. STEREO Lt Rt mode allows you to make a tape with little loss of information. You
can’t directly make an analog tape of Dolby Digital 5.1 or DTS 5.1, but STEREO Lt Rt will produce a Dolby Pro
Logic compatible tape from 5.1 sources that will preserve much of the surround information. Note that Dolby
Digital will not mix LFE to the tape.
WARNING: in order to make STEREO Lt Rt recordings with full range audio, it is necessary to override
the bass management processing in your A/V System Controller. This means that full range audio
(including LFE for DTS) will also be sent to your front left and right speakers. If you have small front
speakers we strongly suggest you turn the volume down or even mute the volume while making STEREO
Lt Rt recordings. Otherwise you can damage your speakers. The volume or mute setting does not effect
the level from the TAPE and V1 outputs.
HEADPHONE mode is identical to STEREO mode except that the internal amplifiers in your A/V System
Controller are turned off. Also, some of the CONTROL outputs may also be turned off (typically CONTROL OUT
1) depending on how your A/V System Controller has been set up (see ADVANCED FEATURES), allowing you to
turn off any external amplifiers or powered subwoofers with compatible CONTROL inputs.
WARNING: in order to provide full range audio to your headphones, it is necessary to override the bass
management processing in your A/V System Controller. This is not a problem if you are using the internal
amplifiers in your A/V System Controller since they will be turned off. However, if you are using external
amplifiers or powered speakers with no CONTROL OUT capability then full range audio (including LFE for
DTS) will also be sent to your front left and right speakers. If you have small front speakers we strongly
suggest you manually turn off your external amplifiers or powered speakers before switching to
HEADPHONE mode. Otherwise you can damage your speakers.
35
p/n 12698 Rev. 9808B
