Bandit SG-75, Operating & Parts Manual

Page: 6 / 60

Bandit
2 Copyright 8/19
INTRODUCTION
The­purpose­of­this­manual­is­to­provide­the­user­with­specifi­cations­and­procedures­for­the­
operation, maintenance and repair of this BANDIT product. As with any piece of equipment, safety
should always be a constant thought while the machine is being operated, serviced or stored.
In order to highlight this consideration, the material which addresses safety is proceeded by the
following signal words:
The equipment is designed and manufactured in accordance with the latest product industry
standards. This alone does not prevent injury. It is the operator’s responsibility to use good
judgement and follow the warnings and instructions as indicated in this manual, on the machine
and follow all safety standards per ANSI and OSHA instructions.
Improper use of the product can result in severe personal injury. Personnel using the equipment
must­be­­qualifi­ed,­trained­and­familiar­with­the­operating­procedures­as­defi­ned­in­this­manual,­
prior to operating the product.
It is the responsibility of the owner or employer to ensure that the operator is trained and practices
safe operation while using and servicing the machine. It is also the owner’s responsibility to provide
and follow a regularly scheduled preventative maintenance and repair program on the product,
using­only­factory­­approved­­replacement­parts.­Any­unapproved­repairs­or­­modifi­cations­may­
not only damage the machine and its performance, but could result in severe personal injury.
Unapproved­repairs­or­modifi­cations­will­void­warranty­and­eliminate­manufacturer­of­any­liability­
claims. Consult the equipment manufacturer with any questions.
Each machine is shipped with a manual, a customer’s check sheet on the product, and any
available parts & service manuals on component parts not produced by this manufacturer.
Additional copies of these manuals and check sheets can be purchased from the manufacturer,
or through the dealer. Engine parts, service and maintenance manuals MUST be purchased
through the engine manufacturer or their dealer.
The­producer­of­this­Bandit­product­reserves­the­right­to­make­any­­modifi­cations­or­revisions­to­
the­design­or­specifi­cations­of­its­machine­without­advance­­notice.­The­producer­also­reserves­
the right to change machine and part prices as needed without advance notice.
NOTICE
WARNING
!
WARNING
!
Signal Word Likelihood of Occurrence
Degree of Potential
Injury or Damage
Will occur if warning is ignored
Can occur if warning is ignored
Will or can occur if warning is ignored
Important, but not hazard related
Severe
Minor
Minor to Severe
Severe
CAUTION
!
NOTICE
DANGER
!
WARNING
!
INTRODUCTION & WARRANTY