BANDIT CONTROLS
4
245774458290 21Dec2016
Mode Page
4. Press the “Bypass” button to manually run Feed Fwd at low Eng RPM and bypass the AutoFeed control. This
will allow auxiliary functions to be operated on certain machines equipped with dump valve hydraulics. To
turn AutoFeed back on, press the same “Bypass” button again. At startup, the machine always defaults to
AutoFeed ON when the key is first turned on.
(A popup alert indicating the controls are in Bypass will blink on every screen because certain control features
are disabled while in Bypass).
(While feeding fwd when
not
in Bypass, when you throttle down Feed Fwd will drop out and AutoRev will fire
one time. However, if you are in Manual Bypass, AutoRev will momentarily fire every time the engine is
throttled down past the AutoFeed Low RPM setting. This is to give the operator a chance to observe the
AutoRev settings).
5. Go back.
1
2
3
4
5
