p. 7 - Mounting
Mounting aid
: handy boy.
This optional tool is used to install the device against a wall. It is attached with two pins to
the wall mounting and so it makes a solid shelf.
On this temporary shelf,
BANDIT
is wired and adjusted. After installation, the two pins
are pulled out, releasing the handy boy, so it can be used again in the next installation.
You’ll save yourself a lot of trouble to keep the device at a working height while connection
works are being performed.
Mounting more than one
BANDIT
240 devices in one large room.
l
f
g ow
o
F
18 metres
3
5
m
e
te
r
Example of mounting in a shop of
630 m². Fog image after 8 sec. of
fog expulsion.
l
f
g ow
o
F
10 metres
1
8
m
e
te
r
Example of mounting in a shop of
180 m². Fog image after 8 sec. of
fog expulsion.
The
BANDIT
240 has a room filling capacity
of ~28 m³ per second. This corresponds with
~10 m²/sec. The max. surface area which
can be secured with one device is equal to
the max. fog expulsion period = 18 s x 10m²/s
which is 180 m². For larger surfaces, such as:
large shops and office spaces, one has to
install more devices, one device each 170 m²
With normal ceiling height of 2.8 metres. Install the units in such a way that the fog stream of
one device points next to, but not in the direction of the next unit. This way, there is a round
stream of fog throughout the entire place. This guarantees the fastest filling of the room.
While mounting, keep in mind to provide a free passage for the fog stream. After a while, the
store keeper has forgotten about the units and stacks boxes and displays right in front of the
fog ejector of the devices.
BANDIT
240 DB
v.206
