7
Whilst in Off Course mode the two course memories may be set. The currently
active course memory is shown by the legend
CRSE1
or
CRSE2
.
Pressing the
LOCK
key brings up the current course memory (e.g.
CRSE1
)
which will flash on the display. Pressing
LOCK
again displays the second
course memory (
CRSE2
). Whilst the setting is displayed it can be adjusted by
using the
▲
and
▼
keys (normally the
MODE
and
TIMER
keys). The display
will revert to normal four seconds after the last key is pressed.
Alternatively the displayed course memory can be reset by sailing on a heading
then depressing the
LOCK
key for one second. The current course will then be
stored in the selected course memory.
If a remote button, shown below, is fitted as an option then this performs the
same functions as the
LOCK
key.
The Optional Remote Button with 15m cable
SETTING THE COURSE MEMORIES
MODE
TIMER
LOCK
SETUP
LIGHTS
ENTER
Network COMPASS
30
20
10
30
20
10
OFFCOURSE
PORT
CRSE 1
STEER
MODE
TIMER
LOCK
SETUP
LIGHTS
ENTER
Network COMPASS
30
20
10
30
20
10
OFFCOURSE
STBD
CRSE 2
STEER
