appendix c
cnd
Page 54
03/09/01
terms and functions
Port Info
The Port Info function is a combination of a
new Port Info database containing all the
relevant Safety and Navigational information
normally found in good pilot books and a new
presentation software which displays special
Port Facility Symbols.
Ports and Services
Turns On/Off the displaying of Ports and
Services.
The default setting is On.
Port Services
To locate and display the nearest available
facilities of a particular type (i.e. the nearest
Hospital, sailmaker, bank, etc.).
The icon list of the available services is shown
on the screen.
Position Correction
Allows the user to correct for any position
inaccuracy due to datum shifts or poor survey
data. This can sometimes occur in areas where
the original paper charts are produced from
very old survey data or where the chart has an
unknown datum or datum that is not listed on
the
CND
list of datums.
R/B
Allows the range and bearing between two
positions on the chart to be calculated
Resolution
It is the resolution angle for the Map
Orientation, range [5, 30] degrees. The default
setting is 15°.
Rolling Road
(page in GPS Mode)
From this page it is possible to display the next
targets bearing (BRG) and distance (DTG), go
on to the previous or next Target, or display the
Route Data Report.
