cnd
getting
started
03/09/01
Page 9
overview of the display
navigate to a single destination
Using the
CURSOR
keypad move the cursor to
your desired destination then press the
NAV TO
softkey, this softkey will then change
to the
START
softkey, pressing the
START
softkey will then create the Direct Target.
A line is drawn connecting the Direct Target
symbol with the boat’s position, all navigation
data is now referred to this Target.
Distance to bearing
Position the cursor on the Direct Target symbol
and the Cursor information box will contain the
Latitude/Longitude, the distance and the
bearing from your boat’s position.
Steer
Pressing the
STEER
Softkey will display the
Destination text box in place of the Position text
box.
Hide Data
Pressing the
HIDE DATA
Softkey will remove
the information box and display a full screen
chart and the softkeys.
Deleting a Destination
Using the
CURSOR
keypad to place the cursor
on the Direct Target symbol, the softkey will
then change to the
STOP
softkey, press the
STOP
softkey and the Direct Target symbol
disappears from the screen.
Cursor Box
Cursor
Text Box
Softkeys
Label
