NETWORK COMPASS USER MANUAL
SETTING THE COURSE MEMORIES
Whilst in Off Course mode the two course memories may be set. The currently active
course memory is shown by the legend
CRSE1
or
CRSE2
.
Pressing the
LOCK
key brings up the current course memory (e.g.
CRSE1
) which will
flash on the display. Pressing
LOCK
twice displays the other course memory (
CRSE2
).
Whilst the setting is displayed it can be adjusted by using the and keys (normally
the
MODE
and
TIMER
keys). The display will revert to normal operation five seconds
after the last key is pressed.
Alternatively the displayed course memory can be reset by sailing on a heading then
depressing the
LOCK
key for two seconds. The current course will then be stored in the
selected course memory.
In Head/Lift mode the same methods can be used to set the
PORT
and
STBD
heading
memories (see THE HEAD/LIFT DISPLAY).
If a remote button, shown below, is fitted as an option then this performs the same
functions as the
LOCK
key.
MODE
TIMER
LOCK
SETUP
LIGHTS
ENTER
Network COMPASS
30
20
10
30
20
10
OFFCOURSE
STBD
CRSE 2
STEER
MODE
TIMER
LOCK
SETUP
LIGHTS
ENTER
Network COMPASS
30
20
10
30
20
10
OFFCOURSE
PORT
CRSE 1
STEER
The Optional Remote Button with 15m cable
8