![background image](http://html.mh-extra.com/html/bandelin/sonorex-technik-ut16/sonorex-technik-ut16_operating-manual_470781007.webp)
23776 GB/2021-06
7 / 18
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
General
• Keep the surface of the air circulation dryer and operating elements clean and dry.
• Do not expose the air circulation dryer to corrosive in
fl
uences.
• Warranty is void in the event of damage to the device caused by using unsuitable
cleaning chemicals.
• The air circulation dryer complies with prescribed EMC limit values, so it can be
assumed that the electromagnetic radiation emanating from the device is harmless
to humans. A binding statement for wearers of implants can only be made at the
place of work together with the implant manufacturer. In case of doubt, information
regarding the allowable electromagnetic exposure level should be obtained from
the implant manufacturer.
• Use only the connection materials supplied.
• If the air circulation dryer changes ownership, the operating manual and safety
instructions must also be passed on to the new owner.
Operation and transport
• Place the air circulation dryer upright on a dry and solid foundation. Pay attention to
the ambient conditions (chapter 2.4).
• The remaining liquid may not contain any solvents that could produce an explosive
and/or toxic atmosphere.
• Only plug the air circulation dryer into an outlet with a grounded socket.
• Do not operate the air circulation dryer while unsupervised.
• The air circulation dryer is equipped with handles for transport.
Damages and defects
• Disconnect immediately from mains power in the event of a defect. Then, allow
the device to cool down.
• In the case of defects, the air circulation dryer may only be repaired by authorised
technical personnel or the manufacturer.
• Replace defective parts only with SONOREX original parts or parts of
the same quality!
• Replace a defective mains cable completely.