24 / 38
23346-002 en/2023-03
6
Maintenance
6.1 Cleaning and maintenance of the device
Cleaning the housing
• Wipe the housing with a damp cloth. Wipe dry with a soft cloth.
• Do not use abrasive cleaning agents, only care products without scouring additives.
• If necessary, disinfect the housing with a suitable surface disinfectant.
Care of the oscillating tank
Impurities in the oscillating tank accelerate the tank’s wear, can lead to corrosion and
reduce the ultrasound effect. Therefore, please observe the following instructions:
• Rinse the oscillating tank thoroughly with water after each use. Wipe dry with
a soft cloth.
• Clean edges and remove residues with a stainless steel cleaning product without
abrasive additives.
• Do not use steel wool, scrapers or shavers to clean the oscillating tank.
• Metal parts and rust particles in the oscillating tank cause corrosion. Therefore,
do not leave any metal parts in the oscillating tank. If rust stains are visible, remove
them immediately with a soft cloth and a stainless steel cleaning product without
abrasive additives.
6.2 Tests
NOTICE
Damage to the device
- Only perform the checks listed in the following section on the device when it is full.
If one of the checks does not lead to the desired result, contact our service department.
See chapter
.
Maintenance