3.0 appendix
3.1 additional locks
outside locking bar
wave washer
bottom rail
flat washer
inside locking bar
head stop
WARNING! Head-stop must be
secured to slide bolt as shown
before door is operated. Failure to
do so will result in unrolling of door
causing damage.
optional padbolt type locking
Assemble locking bar as shown in Fig 3.1.1 ensuring
head stop is fitted.
Fig: 3.1.1
internal waist high slide bolt
(left hand side shown – viewed from inside)
With door fully closed check that bolt slides through
guide. Adjust hole if necessary.
Fig: 3.1.2
15
Roll-A-Door
®
Series 2 installation instructions