*740158*
740158
General
The Benchmark is an automatic electromechanical swinging door operator for use on hinged, center pivoted and offset pivoted doors.
When activated, the Benchmark drives the door to full open position, then electrical power is turned off and the door is closed by spring
force. The activating circuit opens the door from any position in the closing swing. During a power failure, the Benchmark acts as a
manual door closer (Size 3). Door opening and closing cycles, including opening speed, back check speed, hold open time delay, closing
speed, and latch position, are adjustable.
Warning
always disconnect main power to the operator prior to
servicing or cleaning.
Caution
this operator is for indoor use only.
Do not mount any accessories directly to the operator.
Replacement Parts & System Components
Part
27” Header
Full Length Header
Single
Full Length Header Double
Premium Control
Box
9130-3462SC
9140-3462SC
9130-3462SC
9140-3462SC
9150-3462SC
Gear Box
9130-3454S
9140-3554S
9130-3454
9140-3454
9150-3454S
End Caps
9130-334
9140-334
9150-334
Part
Pull
Standard Push
Extended
reveal Push
Finish
Arm Assembly
9130-3077T
9140-3077
9150-3077
9140-3077L
9150-3077L
US28
DC13
Table of Contents
General .....................................................................................................................................................................................................1
Replacement Parts & System Components .............................................................................................................................................1
Replacement Parts & System Components (Cont.) .................................................................................................................................2
1 Pre-Installation Site & Product Check....................................................................................................................................................3
2 Operator Installation ..............................................................................................................................................................................4
3 Wiring.....................................................................................................................................................................................................7
4 Arm & Cover Installation ........................................................................................................................................................................7
5 Operational Check .................................................................................................................................................................................9
6 Operator Adjustment ............................................................................................................................................................................10
7 Release for Service ............................................................................................................................................................................. 11
8 Benchmark III Software ....................................................................................................................................................................... 11
Swing Operator
Models 9130, 9140 & 9150
Benchmark III
Installation Instructions
