background image

TABLE OF CONTENTS

Safety Warnings...........................................................

Product Features..........................................................

Operating Controls......................................................

Package Contents........................................................

Side Room Requirements..............................................

Fixing Weight Bar.....................................................

Fitting Locking Bar Covers ..........................................

Mounting The Opener...............................................

Fixing Curtain To Drum...........................................

Setting Limits Via Control Panel................................

Setting Limits Via Transmitter....................................

Setting Obstruction Force Margin..............................

Re-Calculating Force Margin Sensitivity...................

Coding Transmitters ...................................................

Deleting Transmitters ...................................................

Locking the Control Panel...........................................

Connecting Photo Electric Beam................................

Using Manual Release...................................................

Resetting Factory Defaults.........................................

Door Status Indicators.................................................

Buttons and Functions.................................................

Supplier/Installer Information.....................................

Factory Default Settings..............................................

Technical Specifications.............................................

Trouble Shooting Guide..............................................

Parts List......................................................................

Warranty.......................................................................

3

4

5

6

8

9

9

9

10

11

11

12

13

13

14

14

14

15

15

15

16

16

16

17

17

18

19

B&D Doors to the extent that such may be lawfully excluded hereby expressly disclaims all conditions or warranties, statutory or otherwise which
may be implied by laws as conditions or warranties of purchase of an B&D Doors Rolling Garage Door Opener. B&D Doors hereby further
expressly excludes all or any liability for any injury, damage, cost, expense or claim whatsoever suffered by any person as a result whether 
directly or indirectly from failure to install the B&D Doors Rolling Up Garage Door Opener in accordance with these installation instructions.

Summary of Contents for EconoLift





















Reviews: