1
TABLE OF CONTENTS
Safety rules:
1
Door types:
2
Tools needed:
2
Hardware provided:
2
Before you begin:
2
Completed Installation:
2
ASSEMBLY
3-4
Assemble the rail:
3
Install the chain/belt:
3
Insert Chain/belt into rail:
3
Attach trolley to rail:
3
Fasten rail to opener and install chain/belt:
3
Attach sprocket cover:
4
Assemble header sleeve:
4
INSTALLATION
4-8
Position the header bracket:
4
Install the header bracket:
5
Attach the header bracket:
5
Position the opener:
5
Hang the opener:
6
Attach manual release rope & handle:
6
Connect electric power:
6
Install the light and lens:
6
Fasten door bracket:
7
Connect door arm to trolley:
8
ADJUSTMENT
8-10
Program the travel limits:
8
Force adjustment:
9
Test the safety reverse system:
9
Install the door control:
10
Install the Safety Reversing Sensors (Optional):
11
Programming the code:
11
Operation of your opener:
12
Care of your opener:
12
Maintenance of your opener:
12
Problems:
13
Special features
14
Accessories:
15
Replacement parts:
16-17
Specifications:
18
Warranty:
19
WARNING – IT IS VITAL FOR THE SAFETY
OF PERSONS TO FOLLOW ALL
INSTRUCTIONS. SAVE THESE
INSTRUCTIONS!
Watch the moving door and keep people away
until it is completely opened or closed. Do not
allow children to play with door controls. Keep
remote controls away from children.
Use caution when operating manual release if the
door is open, since it may fall rapidly if out of
balance or if springs are weak or broken. Property
damage or serious personal injury could result.
Disconnect electric power to the garage door
opener before making repairs or removing
covers.
This product is provided with a power supply cord of
special design. If damaged, it must be replaced by a
cord of the same type obtained from your local B&D
distributor, and must be fitted by a specialist.
The Protector System must be installed when the
force at the edge of the closing door force
exceeds 400N (40kg).
Excessive force will interfere
with the proper operation of the Safety Reverse
System or damage the garage door.
IMPORTANT SAFETY INSTRUCTIONS FOR INSTALLATION AND USE
These safety alert symbols mean WARNING – a personal safety or property damage instruction. This
garage door opener is designed and tested to offer reasonable safe service provided it is installed,
operated, maintained and tested in strict accordance with the instructions contained in this manual.
WARNING – INCORRECT INSTALLATION
CAN LEAD TO SEVERE INJURY. FOLLOW
ALL INSTALLATION INSTRUCTIONS.
Door must not extend over public footpaths or
roads during operation.
Install only on a properly balanced garage door in
good operating condition.
Sticking or binding doors
must be repaired. Garage doors and components
attached to them are under extreme tension.
Do not
attempt to repair or adjust them.
Get professional
garage door service.
This unit must be installed in a dry position that
is protected from the weather.
Permanently fasten the caution label adjacent to
the door control button as a reminder of safe
operating procedures.
After installation and adjustment, ensure that your
garage door
reverses
on contact with a 40mm high
object placed on the floor.
Repeat monthly and
adjust as necessary.
114A2991