![background image](http://html.mh-extra.com/html/bandd/bdcb-rc/bdcb-rc_installation-manual_460056015.webp)
ROTATIONAL CONTROL RESET FUNCTION
To reset the rotational controller to its factory setting begin by ensuring the controller is powered off. Place the jumper
for
“
Max Pumps
”
onto 1 pump, then power on. Simulate a call, then power off. Relocate the jumper onto the proper
number of pumps for the system. Turn the controller back on. The next time a call is received, Pump 1 will be the first to
power on.
See below for the location of the jumper pins.
Number of Devices
Pin Adjustment
B&D ROTATIONAL BOARD (BDCB
-
RC)
NOTES
Scranton, IA 51462
Phone (712) 652
-
3424
www.bdmfginc.com
13