![background image](http://html.mh-extra.com/html/bandd/bdcb-rc/bdcb-rc_installation-manual_460056008.webp)
Scranton, IA 51462
Phone (712) 652
-
3424
www.bdmfginc.com
6
MOUNTING THE CONTROL PANEL
Select a mounting location for the Rotational Control Panel (BDCB
-
RC4HP) that meets the following criteria:
•
Close to the water heating equipment
•
Dry, relatively clean area
•
Easily accessible for service personal
•
Facilitates wiring of the unit
•
Mounting surface must be secure
Open the cover of the unit by turning the slot on the front of the cover one full turn counterclockwise. Position the unit
on the mounting surface so that the wiring can be accomplished with minimal amount of difficulty. Mark the location of
the mounting holes on the mounting surface. Remove the unit from the mounting area and drill the appropriate size pilot
hole for the mounting screws.
Mount the unit by installing a screw through each of the three holes provided in the enclosure. Be sure the unit is
securely fastened to the mounting surface. Close the cover on the unit after all wiring is complete.
MOUNTING
HOLES
MOUNTING
HOLES
WARNING: Do not drill through the enclosure into the mounting surface. Doing so may cause chips to
get into the electrical connections and damage the unit.