9
2.3 Startup
Before connecting the receiver, check that the speci-
fications on the type plate (see table below) match
those of your skidder.
Likewise, the device codes in the serial numbers of
the receiver and transmitter must also be the same.
Key to the specifications and operating modes on the receiver label:
The relevant operating mode for the type concerned is marked by a point (
l
) in the corresponding field.
The device is factory-set to your requirements. The function "EF / DF" is set on the receiver using a jumper
– see Sec. 2.4.1.
For more information on the significance of the
designs and operating modes please see Sec. 2.4.
