Check using the chart below before returning your Mad Shark for repair as many problems can be easily solved.
7.4V
Mad Shark V2 RTR MiNi EP F1 Speed Boat
FCC REQUIREMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifi cations to this product not expressly approved by the party responsible
forcompliance may void the user’s authority to operate the equipment.
TROUBLESHOOTING
To Purchase Spare Parts or for Technical Assistance,Visit www.motionrc.com
or www.motionrc.eu
BNC1031-100
Bancroft 390 Brushed Motor With Metal Gear
BNC6004-002
Bancroft 2.4GHz Rx,ESC,Servo Set With XT60 plug(Li-Ion Batt.Version)
BNC6005-007
Bancroft 9G Nylon Gear Servo (235mm Wire)
BNC1031-106
Bancroft Servo Plastic Mount With Screws
BNC1031-102
Bancroft Mad Shark Deck(Yellow) & Gasket With Plastic Lock Set
BNC5077-002
Bancroft P1.4X35mm Φ3.1mm Two BLade Nylon Propeller (Pk2)
BNC6024-002
Bancroft 7.4V 800Mah Li-Ion Pack With XT60 plug
BNC6008-003
Bancroft J2C81 2.4GHz Transmitter
BNC5059-002
Bancroft Aluminium Alloy Coupler W/3 Screws
BNC1031-104
Bancroft Flex Shaft Set For Mad Shark
BNC1031-101
Bancroft Scale Outboard Engine And Rudder Set
BNC1031-103
Bancroft Gear Box Set Without Metal Gear
BNC5072-002
Bancroft Deck Plastic Lock Set
BNC6026-003
Bancroft 2S/3S Balance Charger & EU Plug AC Power Cable
BNC6026-002
Bancroft 2S/3S Balance Charger & US Plug AC Power Cable
