Bancolini UNISCAN C6R, User Manual

Page: 195 / 385

12-31
Symbologies
Set Lengths for Code 39
The length of a code refers to the number of characters (i.e., human readable characters),
including check digit(s) the code contains. Lengths for Code 39 may be set for any length,
one or two discrete lengths, or lengths within a specific range. If Code 39 Full ASCII is
enabled,
Length Within a Range or Any Length are the preferred options.
Note: When setting lengths for different bar code types by scanning single
digit numbers, single digit numbers must always be preceded by a
leading zero.
One Discrete Length - This option allows you to decode only those Code 39 symbols
containing a selected length. Lengths are selected from the numeric bar codes beginning
on page
D-1 in Appendix D . For example, to decode only Code 39 symbols with 14
characters, scan Code 39 - One Discrete Length , then scan 1 followed by 4 . If you make
an error or wish to change your selection, scan Cancel on page D-5 .
Code 39 - One Discrete Length
Two Discrete Lengths - This option allows you to decode only those Code 39 symbols
containing either of two selected lengths. Lengths are selected from the numeric bar
codes beginning on page
D-1 in Appendix D . For example, to decode only those Code 39
symbols containing either 2 or 14 characters, select Code 39 - Two Discrete Lengths ,
then scan 0 , 2 , 1 , and then 4 . If you make an error or wish to change your selection,
scan Cancel on page D-5 .
Code 39 - Two Discrete Lengths