Bancolini UNISCAN C6R, User Manual

Page: 213 / 385

12-49
Symbologies
Set Lengths for Interleaved 2 of 5
The length of a code refers to the number of characters (i.e., human readable characters),
including check digit(s) the code contains. Lengths for I 2 of 5 may be set for any length,
one or two discrete lengths, or lengths within a specific range.
One Discrete Length - This option allows you to decode only those I 2 of 5 symbols
containing a selected length. Lengths are selected from the numeric bar codes beginning
on page
D-1 in Appendix D . For example, to decode only I 2 of 5 symbols with 14
characters, scan I 2 of 5 - One Discrete Length , then scan 1 followed by 4 . If you make
an error or wish to change your selection, scan Cancel on page D-5 .
I 2 of 5 - One Discrete Length
Two Discrete Lengths - This option allows you to decode only those I 2 of 5 symbols
containing either of two selected lengths. Lengths are selected from the numeric bar
codes beginning on page
D-1 in Appendix D . For example, to decode only those I 2 of 5
symbols containing either 2 or 14 characters, select I 2 of 5 - Two Discrete Lengths ,
then scan 0 , 2 , 1 , and then 4 . If you make an error or wish to change your selection,
scan Cancel on page D-5 .
I 2 of 5 - Two Discrete Lengths