background image

1. Warning  Report

1. Warning  Report

Before installation and using our dispensing valve BV-300, please be fully aware of this user manual.

Fluid Leakage Hazard

-If the fluid splashes up to your eyes or skin, it can also cause a serious injury.

-Handle with extreme care not to be in contact with liquid in case of nozzle exchange or cleaning.

-Make sure that pressure must be released before the nozzle is removed when you exchange a nozzle.

Valve Overuse Hazard

-If a valve is damaged due to excessive pressure, unauthorized alteration of parts, and overuse, it may cause a danger 

by exploding or leaking (explosion or leakage may occur).

-Do not make any kind of unauthorized alterations.   

We are not responsible for any repairs, after-sales service caused by them.

-This valve operates under max material delivery air pressure 

4kgf/cm².

Do not exceed this operation pressure

.

Others

High pressure material can be leaked  if a hose is damaged or worn.

Check a hose for any worn-downs, damages, or swollen before use.

Please change a hose immediately if any malfunction is found.

Prevent leakage from loosened joints by tightening before use.

Summary of Contents for BV-322M










Reviews: