4
PART. A
PART. B
Right barrier with
the arm in vertical
position
FIG. 4
PART. A
PART. C
PART. D
PART. F
PART. E
Operations to transform a right barrier into
a left barrier
1. Disconnect the power supply of the barrier
2. Unlock the motor
3. Place the barrier in the opening position
4. Lock the motor
5. Remove the arm if installed
(see ARM REMOVAL pag.10)
6. Unscrew completely the regulation nut of the
spring (PART: F)
7. Remove the articulated joint (PART:D) of the
balancing lever (PART:B )and place it on the
true in the opposite side
8. Insert the regulation screw in the left hole and
screw the regulation nut of the spring
9. Tighten the screw on the balancing lever
10. Check the proper balancing of the arm, the
regulation of the limitswitches and the
anti-vibration rubber dumper ( see pag.11)
FIG.5
RIGHT BARRIER
LEFT BARRIER
