ELECTRICAL CONNECTIONS
•
It is advisable to make all connections with flexible electric wire.
•
Conductor cross-sections not specified are to be considered as 0,75
mm².
•
The power lines must be distanced from the hot parts.
•
The burner can be installed exclusively in environments with pollu
-
tion degree 2 as specified in Standard EN 60204-1.
•
Make sure that the power line has frequency and voltage values
suitable for the burner.
•
The three-phase or single-phase power supply line must have a swi
-
tch with fuses.
•
The regulations further require a switch on the burner power supply
line, to be positioned outside the boiler room and easily accessible.
•
The main line, the relevant switch with fuses and the possible limiter
must be suitable to support the maximum current absorbed by the
burner.
•
An omnipolar switch with a contact opening gap equal or above 3
mm is required for the mains supply connection, in accordance with
current safety regulations.
•
Refer to the wiring diagram for electrical connections (line and ther
-
mostats).
•
Remove the external insulating seal of the supply pipe necessary for
the connection, preventing the cable to touch metal parts.
CAUTION / WARNINGS
Only professionally qualified personnel may open the burner
electrical switchboard.
14 / 46
0006160318_202106
ENGLISH
Summary of Contents for TBML 1200 ME
