baltur TBML 1200 ME, Instruction Manual For Installation, Use And Maintenance

Page: 57 / 96

DESIGN CHARACTERISTICS
The burner consists of:
• Ventilating part in light aluminium alloy.
• Centrifugal fan for high performances.
• Intake air conveyor.
• Combustion head complete with stainless steel nozzle.
• Flame inspection glass.
• Three-phase electric motor to run fan.
• Air pressure switch to ensure the presence of combustion air.
• Gas train complete with control valve, operating and safety valves,
valve seal control, minimum and maximum pressure switch, pressu -
re control and gas filter.
• Fuel flow rate regulation by means of servomotor controlling gas
valve and flow rate regulator.
• Automatic burner command and control equipment with micropro -
cessor in compliance with European standard EN298 integrated with
valve seal control.
• Flame detection with sensor
• Control panel including on/off and burner off switches, fuel selector,
operation and shut-down warning lights, keypad for programming
electronic cam.
• Electrical system with protection rating IP54.
TECHNICAL FUNCTIONAL CHARACTERISTICS
• Dual burner, able to operate alternately with natural gas or with die -
sel (max viscosity 1.5° E at 20°C).
• EC approval according to European Standard EN 676 for natural
gas and Standard EN 267 for diesel.
• Flame modulation operation for both fuels through electronic regula -
tor, supplied on request.
• Electronic command and control equipment with microprocessor.
• Fuel / combustion air flow rate regulation by means of two servomo -
tors controlled by the electronic equipment.
• Combustion head with partial recirculation of combusted gases with
reduced emissions (class III according to EN 676 for natural gas,
class II according to EN 267 for diesel).
• Hinge opens both ways to permit convenient access to the mixer
without dismantling the burner from the boiler.
• Air minimum and maximum flow rate regulation by means of electric
stepper servomotor with pause closure of damper to prevent any
heat dispersion to flue.
• Valve seal control and power regulation functions according to Eu -
ropean Standard EN 676 (read carefully the operating instructions
given in the GUIDE supplied along with the burner for further details
about the equipment operations).
OPERATING RANGE
0
5
10
15
20
25
30
1 2 3 4 5 6 7 8 9 10 11 12 13 kW x 1000
Campo_lavoro_TBML1200ME
TBML 1200 ME
1
mbar / hPa
IMPORTANT
The working fields are obtained from test
boilers corresponding to the standard
EN267 for liquid fuels and EN676 for gas
fuels and are indicative for the combination
burner-boiler. For correct working of the
burner, the size of the combustion chamber
must correspond to current regulations; if
not the manufacturers must be consulted.
The burner shall not operate outside its spe -
cific operating range.
1 Minimum power adjustable with diesel.
DANGER / ATTENTION
During the ignition and adjustment pha-
se, check that the maximum and minimum
outputs at which the burner is adjusted are
within the working range in order to avoid
damage to the system.
9 / 46
0006160318_202106
ENGLISH