baltur TBML 120 ME, Installation, Use And Maintenance Instruction Manual

Page: 104 / 124

ENGLISH
42 / 60
0006160032_201711
MAINTENANCE TIME
Part description Action to be performed Gas Diesel
COMBUSTION HEAD
ELECTRODES
VISUAL CHECK, CERAMIC INTEGRITY. END GRINDING, CHECK DISTANCE,
CHECK ELECTRICAL CONNECTION
YEARLY YEARLY
FLAME DISK INTEGRITY VISUAL CHECK FOR ANY DEFORMATIONS, CLEANING YEARLY YEARLY
IONISATION PROBE
VISUAL CHECK, CERAMIC INTEGRITY. END GRINDING, CHECK DISTANCE,
CHECK ELECTRICAL CONNECTION
YEARLY N.A.
COMBUSTION HEAD COMPONENTS INTEGRITY VISUAL CHECK FOR ANY DEFORMATIONS, CLEANING YEARLY YEARLY
LIQUID FUEL NOZZLES REPLACEMENT N.A. YEARLY
INSULATING SEAL VISUAL INSPECTION OF LEAK TIGHTNESS AND POSSIBLE REPLACEMENT YEARLY YEARLY
GAS DELIVERY FITTING GASKET VISUAL INSPECTION OF LEAK TIGHTNESS AND POSSIBLE REPLACEMENT YEARLY N.A.
AIR LINE
AIR GRILLE/SHUTTERS CLEANING YEAR YEAR
AIR SHUTTER BEARINGS GREASING, (NOTE: apply only to burners with bearings to be greased) YEAR YEAR
FAN FAN AND SCROLL CLEANING, DRIVE SHAFT GREASING YEAR YEAR
AIR PRESSURE SWITCH CLEANING YEAR YEAR
AIR PRESSURE PIPES AND OUTLET CLEANING YEAR YEAR
SAFETY COMPONENTS
FLAME SENSOR CLEANING YEAR YEAR
GAS PRESSURE SWITCH OPERATIONAL TEST YEAR N.A.
VARIOUS COMPONENTS
ELECTRIC MOTORS COOLING FAN CLEANING, BEARING NOISE CHECK YEAR YEAR
MECHANICAL CAM
CHECK OF WEAR AND OPERATION, GREASING OF SLIDING BLOCK AND
SCREWS
YEAR YEAR
LEVERS/TIE-RODS/BALL JOINTS CHECK OF ANY WEAR, COMPONENT LUBRICATION YEAR YEAR
ELECTRICAL SYSTEM CHECK OF CONNECTIONS AND TERMINAL TIGHTENING YEAR YEAR
INVERTER COOLING FAN CLEANING AND TERMINAL TIGHTENING YEAR YEAR
CO PROBE CLEANING AND CALIBRATION YEAR YEAR
O2 PROBE CLEANING AND CALIBRATION YEAR YEAR
FUEL LINE
HOSES REPLACEMENT N.A. 5 YEARS
PUMP FILTER CLEANING N.A. YEAR
LINE FILTER FILTERING ELEMENT CLEANING / REPLACEMENT N.A. YEAR
GAS FILTER REPLACE THE FILTER YEAR N.A.
HYDRAULIC/GAS SEALS CHECK OF ANY LEAKAGES YEAR _|C|_
COMBUSTION PARAMETERS
CO TEST
COMPARISON WITH THE VALUES RECORDED UPON THE EQUIPMENT
START-UP
YEAR YEAR
CO2 TEST
COMPARISON WITH THE VALUES RECORDED UPON THE EQUIPMENT
START-UP
YEAR YEAR
TEST OF FUMES ACCORDING TO
BACHARACH INDEXES
COMPARISON WITH THE VALUES RECORDED UPON THE EQUIPMENT
START-UP
N.A. YEAR
NOX TEST
COMPARISON WITH THE VALUES RECORDED UPON THE EQUIPMENT
START-UP
YEAR YEAR
IONISATION CURRENT TEST
COMPARISON WITH THE VALUES RECORDED UPON THE EQUIPMENT
START-UP
YEAR N.A.
FUME TEMPERATURE TESTING
COMPARISON WITH THE VALUES RECORDED UPON THE EQUIPMENT
START-UP
YEAR YEAR
OIL DELIVERY/RETURN PRESSURE
TESTING
COMPARISON WITH THE VALUES RECORDED UPON THE EQUIPMENT
START-UP
N.A. YEAR
GAS PRESSURE REGULATOR PRESSURE MEASUREMENT UPON START-UP YEAR N.A.
IMPORTANT
In case of heavy use or particular fuels, the maintenance frequency must be increased and adapted to the use conditions according to the
maintenance technician's indications.