baltur TBG 450LX ME, Instruction Manual For Installation, Use And Maintenance

Page: 48 / 92

WARNINGS FOR USE IN SAFETY
CONDITIONS
PURPOSE OF THIS MANUAL
This manual is aimed at ensuring the safe use of the product to which it
refers, through the indication of the necessary components in order to
prevent the original safety features from being jeopardized by improper
or erroneous installation and by improper, erroneous or unreasonable
use.
The manufacturer accepts no liability for any damage caused by im-
proper installation and use or in case of non-compliance with the ma-
nufacturer's instructions.
• The manufactured machines have a minimum life of 10 years, if nor-
mal working conditions are met and periodic maintenance specifi ed
by the manufacturer is done.
• The instruction booklet is an integral and essential part of the pro-
duct and must be given to the user.
• The user must keep the booklet to hand for consultation when ne-
eded.
• Before starting to use the equipment, carefully read the "In-
structions for use" in this manual and those directly applied to
the product in order to minimize risks and accidents.
• Observe the SAFETY WARNINGS, avoid IMPROPER USES.
• Installer must evaluate any RESIDUAL RISK that might arise.
• This manual contains symbols to highlight some parts of the text or
to indicate some important specifi cations. You fi nd their description
below.
DANGER / ATTENTION
This symbol indicates a very dangerous situation that, if ignored,
can seriously endanger people health and safety.
CAUTION / WARNINGS
This symbol indicates that it is necessary to behave properly to
void endangering people's health and safety and causing eco-
nomical damages.
IMPORTANT
This symbol indicates particularly important technical and opera-
tive information that must not be neglected.
ENVIRONMENTAL CONDITIONS OF OPERATION, STORAGE
AND TRANSPORT
The equipment is shipped with the manufacturer package and tran-
sported on road, by boat or by train in compliance with the standards
on goods transport in force for the actual mean of transport used.
The unused equipment must be placed in closed rooms with enough
air circulation in standard temperature and humidity conditions.
The storage time is 3 years.
GENERAL WARNINGS
• The equipment production date (month, year) is written on the bur-
ner identifi cation plate located on the equipment.
• The equipment cannot be used by people (including children) with
reduced physical, sensory or mental capacities or lacking experien-
ce or know-how.
• The equipment use is allowed to such people only if they can have
access to, through a responsible person, the information concerning
their safety, surveillance and instructions concerning equipment use.
• Children must be watched over to prevent them from playing with
the equipment.
• This appliance should only be used for the purpose it has been de-
signed for. Any other use is to be considered improper and therefore
dangerous.
• The equipment must be installed in accordance with current regu-
lations, with the manufacturer’s instructions and by qualifi ed tech-
nicians.
• The term ‘qualifi ed personnel’ refers to those specifi cally trained in
the fi eld and with proven skills, in accordance with the local law in
force.
• An incorrect installation can cause injury or damage to persons,
animals and objects, for which the manufacturer cannot be held re-
sponsible.
• After removing all the packaging make sure the contents are com-
plete and intact. If in doubt, do not use the equipment and contact
your supplier. The packing pieces are potentially dangerous and
must be kept away from children.
• The majority of the equipment components and its package is made
with reusable materials. The package, the equipment and its compo-
nents cannot be disposed of with the standard waste but according
to the regulations in force.
• Before carrying out any cleaning or maintenance, disconnect the
equipment at the mains supply, using the system’s switch and/or
shut-off systems.
• If the equipment is sold or transferred to another owner or if the
owner moves and leaves the equipment, make sure that the booklet
always goes with the equipment so it can be consulted by the new
owner and/or installer.
• When the equipment is working, do not touch hot parts that are
usually positioned near the fl ame and the fuel pre-heating system,
if any. They could still be hot after the equipment is turned off for a
short period of time.
ENGLISH
2 / 44
0006160281_202007