baltur 67380010, Instruction Manual For Installation, Use And Maintenance

Page: 63 / 76

ENGLISH
25 / 36
0006160334_201906
MAINTENANCE TIME
Part description Action to be performed Gas Diesel
COMBUSTION HEAD
ELECTRODES
VISUAL INSPECTION OF THE INTEGRITY OF CERAMICS. TIP GRINDING, CHECK
DISTANCE, CHECK ELECTRICAL CONNECTION
YEARLY YEARLY
FLAME DISC INTEGRITY VISUAL CHECK FOR ANY DEFORMATIONS, CLEANING, YEARLY YEARLY
IONISATION PROBE
VISUAL INSPECTION OF THE INTEGRITY OF CERAMICS. TIP GRINDING, CHECK
DISTANCE, CHECK ELECTRICAL CONNECTION
YEARLY n.a.
COMBUSTION HEAD
COMPONENTS
INTEGRITY VISUAL CHECK FOR ANY DEFORMATIONS, CLEANING, YEARLY YEARLY
LIQUID FUEL NOZZLES REPLACEMENT n.a. YEARLY
INSULATING GASKET SEAL VISUAL INSPECTION AND POSSIBLE REPLACEMENT YEARLY YEARLY
GAS DELIVERY COUPLING SEAL SEAL VISUAL INSPECTION AND POSSIBLE REPLACEMENT YEARLY n.a.
AIR LINE
AIR GRILLE/DAMPERS CLEANING YEAR YEAR
AIR DAMPER BEARINGS GREASING, (Note: apply only on burners with bearings requiring lubrication) YEAR YEAR
FAN FAN AND SCROLL CLEANING, DRIVE SHAFT GREASING YEAR YEAR
AIR PRESSURE SWITCH CLEANING YEAR YEAR
AIR PRESSURE PORT AND
PIPES
CLEANING YEAR YEAR
SAFETY COMPONENTS
FLAME SENSOR CLEANING YEAR YEAR
GAS PRESSURE SWITCH FUNCTIONAL INSPECTION YEAR n.a.
VARIOUS COMPONENTS
ELECTRIC MOTORS COOLING FAN CLEANING, BEARING NOISE CHECK YEAR YEAR
MECHANICAL CAM
CHECK OF WEAR AND OPERATION, GREASING OF SLIDING BLOCK AND
SCREWS
YEAR YEAR
LEVERS/TIE-RODS/BALL JOINTS CHECK OF ANY WEAR, COMPONENT LUBRICATION YEAR YEAR
ELECTRICAL SYSTEM CHECK OF CONNECTIONS AND TERMINAL TIGHTENING YEAR YEAR
INVERTER COOLING FAN CLEANING AND TERMINAL TIGHTENING YEAR YEAR
CO PROBE CLEANING AND CALIBRATION YEAR YEAR
O2 PROBE CLEANING AND CALIBRATION YEAR YEAR
FUEL LINE
HOSES REPLACEMENT n.a. 5 YEARS
PUMP FILTER CLEANING n.a. YEAR
LINE FILTER FILTERING ELEMENT CLEANING / REPLACEMENT n.a. YEAR
OIL TANK FILTER CLEANING WITH COLD FUEL OIL n.a. n.a.
GAS FILTER REPLACING THE FILTERING ELEMENT YEAR n.a.
HYDRAULIC/GAS SEALS CHECK OF ANY LEAKAGES YEAR _|C|_
OIL PRE-HEATER CLEANING, CONDENSATE DRAIN FROM LOWER CAP TO COLD FUEL OIL n.a. n.a.
COMBUSTION PARAMETERS
CO CONTROL COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR YEAR
CO2 CONTROL COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR YEAR
BACHARACH SMOKE INDEX
CONTROL
COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP n.a. YEAR
NOX CONTROL COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR YEAR
IONISATION CURRENT
CONTROL
COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR n.a.
SMOKE TEMPERATURE
CONTROL
COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR YEAR
DELIVERY/SCAVENGE OIL
PRESSURE CONTROL
COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP n.a. YEAR
GAS PRESSURE REGULATOR PRESSURE MEASURED AT START-UP YEAR n.a.
IMPORTANT
In case of heavy-duty operation or when using special fuels, the maintenance intervals must be reduced adapting them to the real
operating conditions, according to the indications of the maintenance technician.