33
Brake pedal height
Loosen the locknut and roll the pedal height to adjust bolt.
Adjust the brake pedal height to 79.6mm or what you need height.(Figure22-2)
Twenty-third: Rocker arm/ rocker arm fork
Put the support under engine, make the rear wheel off ground.
Catch the rocker arm, shaking left and right to check if there is
something wrong with rocker arm bearing.
（
Figure 23-1
）
If bearing wear excessive, replace a new one.
Inspect rocker arm fork, replace all damage needle bearing.
It should disassemble when every time works 7.5 hours,
Clean,inspect rocker arm and rocker arm fork center bearing and all of the related sealing element.
Add lubricant and reassemble.
Twenty-fourth: Wheels / tires
Put support under the engine,make the front wheel off ground,
Catch the bottom of front brake, shaking front wheel, check if there is
something wrong with the front wheel bearing;
Figure24-1
Figure23-1
Summary of Contents for NC250
Page 1: ...0...
