3
Cooling system description
………
1-6
Maintenance Regulation
1. Must to use this company or this company recommend spare parts or lubricants
；
Not to suits to this company designing
parts or lubricants ,may damage the vehicle .
2. Should use the metric tool, bolt, nuts and screws to maintain vehicle, it
’s not can be interchanged with British system.
3. If rebuild the vehicle should change the new gaskets, O-rings, split pins and retainer rings.
4. When tighten bolts and nuts,first starting with the big diameter or from the inner bolts.
And then increase the number of
steps by diagonal unless specified special order to tighten to the specified torque.
5. After decomposition,should clean the spare parts in the cleaner solvent; lubricating every smooth surface before
assembly .
6. After assembly,check all spare parts installation and operation, if all these are right.
7. Dredge all the cables and wiring harness.
8. Please go to our authorized dealers for repair, unless the owners have special tools and maintenance of data and is a
qualified mechanic.
Brief (Technical specification) :
Motorcycle running-in period is 1000km, then at the range of 1000Km, the speed
should not exceed 50km/h.
I t e m s
D e s c r i p t i o n
M e a s u r e m e n t
L e n g t h
2 1 8 0 m m
Summary of Contents for NC250
Page 1: ...0...
