![background image](http://html1.mh-extra.com/html/balt/27624/27624_assembly-instructions-manual_3602430010.webp)
2
A
Knob 2 EA
B
Arm Pin
1 EA
C
Projector Mount Finger 4 EA
D
Screws M6 x 15mm 6 EA
E
Small Allen Wrench 1 EA
F Large Allen Wrench 1 EA
G Hex Nut M6 4 EA
H Large Washer 2 EA
J Small Washer 4 EA
Part Drawing Description Qty
Do not use unless all screws are tight. At least every six months, check all screws to be sure
they are tight. If parts are missing, broken, damaged, or worn, stop use of the product
until repairs are made by your dealer using factory authorized parts.
Part Drawing Description Qty
Wall Mount Arm
P-1
Arm 1 EA
P-2
Yoke 1 EA
P-3
Yoke Strap 1 EA
Hardware List
DISCLAIMER
MooreCo, Inc. makes no claim that the information contained herein covers all details,
conditions, variations, nor does it provide for every possible contingency in
connection with the installation or use of this product.
Failure to provide adequate structural strength for the installation of this kit can
result in serious personal injury or damage to the equipment! It is the installer’s
responsibility to make sure the structure to which this mount is attached can support
three times the combined weight of all equipment.
It is also the installer’s responsibility to determine the type of wall and the best wall
mounting hardware to use for the safe installation of this equipment. Follow the
hardware suppliers instructions for the correct predrill and hole depth for your wall
and the type anchor you have chosen.