background image

2

A

         Locking Caster                  4 EA

B

      Allen Recess Screw              6 EA

C

      Washer                                6 EA

D

E

         Allen Wrench

           1 EA

F                              Wood Screw                      4 EA

G                             Caster Wrench                  1 EA

H                            Back Panel Screw              6 EA

Part     Drawing          Description                     Qty

Do not use unless all screws are tight.  At least every six months, check all screws to be sure

they are tight.  If parts are missing, broken, damaged, or worn, stop use of the product

until repairs are made by your dealer using factory authorized parts.

Part     Drawing        Description                     Qty

#27624 Elevation Stand

P-1

Base                                    1 EA

P-2

Left  Upright                          1 EA

P-3

Right Upright                         1 EA

P-4                                  Back Shelf                         1 EA

P-5                               Back Panel                           1 EA

 Hardware List

Should you require assistance during assembly,

please call our Customer Service Department

Monday - Friday  8 a.m. - 5 p.m.

Central Standard Time

 

1-800-749-2258

Missing Parts or UPS Damaged Parts

For Your Convenience you can

EMAIL us at

[email protected]

24HOURS 7 DAYS A WEEK

Panel Clip                            2 EA

Summary of Contents for 27624














Reviews: