background image

LIMITED PRODUCT WARRANTY

BALMAR warrants to the original consumer/purchaser the product is free from any defects in material or workmanship for a period 

of one year from the date of purchase. If any such defect is discovered within the warranty period, BALMAR will replace the regula-

tor free of charge, subject to verification of the defect or malfunction upon delivery or shipping prepaid to BALMAR.
This warranty DOES NOT apply to defects or physical damage resulting from abuse, neglect, accident, improper repair, alteration, 

modification, or unreasonable use of the products resulting in breakdown, cracked or broken cases nor are parts damaged by fire, 

water, freezing, collision, theft, explosion, rust, corrosion or items damaged in shipment in route to BALMAR for repair. BALMAR 

assumes no responsibility for consequential damage or loss or expense arising from these products or any labor required for ser-

vice or repair.
BALMAR WILL NOT repair or be held responsible for any product sent without proper identification and return address or RA 

number clearly marked on the package. You must include proof of date and place of purchase (photocopy of purchase invoice) or 

we cannot be responsible for repairs or replacement. In order to expedite warranty claims more efficiently, BALMAR asks that prior 

to returning a defective product for repair, you call their customer service department for a warranty return authorization number. 

If factory service is required, you can contact our BALMAR Customer Service Department Monday through Thursday, 7:30 AM 

to 5:30 PM, (PST)1-360 435-6100 ext “3”. Material required for the repair or replacement for the defective part or product is to be 

supplied free of charge upon delivery of the defective regulator to BALMAR, 18930 59 Ave. NE, Arlington, WA 98223. Customer 

is responsible for all return transportation charges and any air or rush delivery expense. BALMAR reserves the right to determine 

whether to repair or replace defective components.
THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IM-

PLIED WARRANTY LASTS. NO PERSON, AGENT, DEALER IS AUTHORIZED TO GIVE ANY WARRANTY.

BALMAR 353 James Record Rd SW, Huntsville, AL 35824, Phone: (360) 435-6100, Fax: (360) 435-3210, E-mail: [email protected], Web: www.balmar.net

Typical MC-612-DUAL

System Installation

Regulator is shown installed with 

Balmar 6-Series alternators. See 

your alternator installation manual 

for specific terminal connection in-

formation for your alternator. See 

detailed wiring instructions for 

specific connection points for op-

tional wiring additions not shown.

- 16 -

SUP-0204 | REV A

Summary of Contents for MAX CHARGE MC-612-DUAL

















Reviews: