20
3
Product Description
BVS SC-_1280Z00-07-0_0
SMART
CAMERA
IO
english
The operating states of the vision system, the IO-Link master and the LAN and fieldbus interface
are displayed using LEDs. The display elements are distributed across the front and the under-
side of the
SMART
CAMERA
.
Displays on the front
Displays at the plug connectors
2
1
4
3
1
2
Power LED
Signal LED
3
4
LAN Act
LAN Link
Figure 17: Display elements on the front and at the plug connectors
Displays on the front
LED
Display
Function
Power LED
Off
No supply voltage
Illuminating green
Inspection is running or waiting for a trigger
Flashing green
Inspection stopped or in configuration mode
Illuminating red
Fault
Flashing red
Firmware update active
Signal LED
Off
Signal = 0
Yellow, lit
Signal = 1
The signal LED can indicate the status of any I/O signal in the area of the image analysis. The
configuration of this function is done via the BVS Cockpit web interface. (see chapter “Digital I/O
Interface” on page 26)
Displays at the plug connectors
LAN
LED
Display
Function
LAN Link
Off
No LAN connection
Green
LAN connection established
LAN Act
Off
No data transfer
Yellow, flashing
Data transmission
The outside of the camera can be cleaned with a soft cloth. Persistent dirt can be removed with
a cloth that is first moistened with a soap solution and wrung out. After wiping off the dirt spots,
wipe the camera with a dry cloth.
3.6
Display
elements
3.7
Cleaning
