No. 852592 E Edition G17; Replaces edition 1111
6XEMHFWWRPRGL¿FDWLRQ
Mounting and
operating instructions
10
1
Signs and Symbols
2
Safety information
Warning
This symbol signals passages in the manual which must be observed at all times. Non-compliance can
cause injuries or material damage.
Warning Laser
This symbol appears in front of warning passages concerning the danger of laser beams.
Information
This symbol signals passages with useful information.
It is essential that this manual is read, thoroughly understood and observed before setting the
BOD 26K sensor into operation.
7KH%2'.VHQVRUPD\RQO\EHFRQQHFWHGPRXQWHGDQGDGMXVWHGE\TXDOL¿HGSHUVRQQHO
Interventions and alterations to the device are not permissible!
The BOD 26K sensor is not a safety component as described by EU machine directives.
The BOD 26K sensor complies with laser protection class 2 according to IEC 60825-1.
The technical requirements comply with EN 60947-5-2.
&RPSOLHVZLWK&)5DQGH[FHSWIRUGHYLDWLRQVSXUVXDQWWRODVHU1RWLFH1R
dated June 24, 2007.
1HYHUORRNLQWRWKHSDWKRIWKHODVHU'RQRWVXSSUHVVWKHUHÀH[WRFORVHWKHH\HOLGV
Gazing into the beam path for longer periods can damage the retina of the eye.
When mounting the sensor, ensure if possible that the beam path is sealed off at the end.
The laser must not be directed at people (head height).
:KHQDOLJQLQJ%2'.HQVXUHWKDWWKHUHDUHQRUHÀHFWLRQVRQUHÀHFWLYHVXUIDFHV
Should the safety label on the BOD 26K sensor be partly covered due to its installation position,
other safety labels are to be positioned on visible parts of the sensor. When applying the new
safety label, make sure that you cannot look into the laser beam whilst reading it.
