Balluff BNI EIP-502-105-R015, User Manual

Page: 94 / 274

www.balluff.com 37
8 Display
8.11. Module
Information
• Briefly pressing the arrow key allows scrolling through the "Module information"
menu.
• The product name, module updates and Mac-ID are displayed as information.
8.12. General
Information
• Press and hold the arrow key to scroll quickly in editing mode.
• If no key is pressed for 10 seconds, the view reverts to the standard display (4th
octet of the IP address). Changes that have not been saved will be lost.
• Differences between the new configuration and the configuration with which the
module works are indicated by an unequal sign. In this case, the screen switches
to the standard display after 5 seconds.
• The display flashes in editing mode. The display flickers in fast scroll mode.
• If the module receives a single ping, the word "Ping" appears on the display for a
couple of seconds. Then the previous display returns. You can exit ping mode
sooner by briefly pressing the Set key.
• If the module receives two or more pings, the word "Ping" appears on the display.
You can exit the display only by briefly pressing the Set key. Then the display
before the ping returns.
• The LED function of the display LEDs can be set in a user-specific manner by
setting several bits in the process data outputs. (see bit layout, standard output
data)
• The plc lock function can also be used by setting a bit in the process data outputs.
(see bit layout, standard output data)
Note
You cannot select editing mode in the display if the plc lock is set in the process
data inputs by a bit (see bit layout, standard output data)
BNI
EIP-508-
105-R015 Version
SW: x.x
HW: x.x
MAC ID
XX : XX : XX :
XX : XX : XX
 
