Balluff BMP 01-ZLZPP 1A 00-P S75 Series, User Manual

Page: 183 / 292

www.balluff.com 21
português
7
Interface IO-Link (continuação)
7.5 Dados de parâmetros
Índice Subíndice Parâmetro Tamanho Acesso Gerenciamento
de dados
MDC (Measurement Data Channel) (vide Capítulo 7.5.1)
0x00C1 (193) 0 Offset 4 Byte Read/Write X
0x00C2 (194) 0 Preset 4 Byte Read/Write X
0x00C3 (195) 0 Output Characteristics 1 Byte Read/Write X
0x00C4 (196) 0 Enable Detection Range 1 Byte Read/Write X
0x4080 (16512) 0, 1, 2, 3, 4 MDC Describer 11 Byte Read Only
0x0202 (514) 0, 1, 2 Physical Measurement Limits 8 Byte Read/Write X
SSC (Switching Signal Channels) (vide Capítulo 7.5.2)
0x003A (58) 0 Teach-In Select 1 Byte Read/Write
0x003B (59) 0 Teach-In Result 1 Byte Read Only
0x003C (60) 0, 1, 2 SSC1 Parameter 8 Byte Read/Write X
0x003D (61) 0, 1, 2, 3 SSC1 Configurartion 4 Byte Read/Write X
0x003E (62) 0, 1, 2 SSC2 Parameter 8 Byte Read/Write X
0x003F (63) 0, 1, 2, 3 SSC2 Configurartion 4 Byte Read/Write X
0x4000 (16384) 0, 1, 2 SSC3 Parameter 8 Byte Read/Write X
0x4001 (16385) 0, 1, 2, 3 SSC3 Configurartion 4 Byte Read/Write X
0x4002 (16386) 0, 1, 2 SSC4 Parameter 8 Byte Read/Write X
0x4003 (16387) 0, 1, 2, 3 SSC4 Configurartion 4 Byte Read/Write X
Device Configuration
0x00B4 (180) 0, 1, 2 Output Type (vide Capítulo 7.5.3) 2 Byte Read/Write X
0x00F8 (248) 0, 1, 2 Diagnosis Suppression Configuration
(vide Capítulo 7.5.4)
2 Byte
Read/Write X
Condition Monitoring
0x0052 (82) 0, 1, 2, 3, 4, 5 Device Temperature (vide Capítulo 7.5.5) 10 Byte Read Only
0x0053 (83) 0, 1, 2 Temperature Thresholds (vide Capítulo 7.5.6) 4 Byte Read/Write X
0x0057 (87) 0, 1, 2, 3 Operating Hours (vide Capítulo 7.5.7) 12 Byte Read Only
0x0058 (88) 0 Boot Cycle counter (vide Capítulo 7.5.8) 4 Byte Read Only
Parâmetros do sistema
0x0003 (3) 0, 1, 2, 3, 4, 5 Data Storage (vide Capítulo 7.5.9) 72 Byte Read/Write
0x000C (12) 0 Device Access Locks (vide Capítulo 7.5.10) 2 Byte Read/Write X
0x000D (13) 0, 1, 2, 3, 4 ProfileCharacteristic (vide Capítulo 7.5.11) 8 Byte Read Only
0x000E (14) 0, 1, 2, 3 PD Input Descriptor (vide Capítulo 7.5.12) 9 Byte Read Only
Tab. 7-6: Dados dos parâmetros interface IO-Link
BMP 01-ZLZPP _ 1A- _ _ _ _ -00 -P _ _ /P _ _ -S4/P _ _ -S75
Sistema de posicionamento magnético