Balluff BMP 01-ZLZPP 1A 00-P S75 Series, User Manual

Page: 119 / 292

www.balluff.com 21 italiano
7
Interfaccia IO-Link (continua)
7.5 Dati parametrici
Indice Subindice Parametro Dimensioni Accesso Tenuta dati
MDC (Measurement Data Channel) (vedere il capitolo 7.5.1)
0x00C1 (193) 0 Offset 4 byte Read/Write X
0x00C2 (194) 0 Preset 4 byte Read/Write X
0x00C3 (195) 0 Output Characteristics 1 byte Read/Write X
0x00C4 (196) 0 Enable Detection Range 1 byte Read/Write X
0x4080 (16512) 0, 1, 2, 3, 4 MDC Describer 11 byte Read Only
0x0202 (514) 0, 1, 2 Physical Measurement Limits 8 byte Read/Write X
SSC (Switching Signal Channels)
(vedere il capitolo 7.5.2)
0x003A (58) 0 Teach-In Select 1 byte Read/Write
0x003B (59) 0 Teach-In Result 1 byte Read Only
0x003C (60) 0, 1, 2 SSC1 Parameter 8 byte Read/Write X
0x003D (61) 0, 1, 2, 3 SSC1 Configurartion 4 byte Read/Write X
0x003E (62) 0, 1, 2 SSC2 Parameter 8 byte Read/Write X
0x003F (63) 0, 1, 2, 3 SSC2 Configurartion 4 byte Read/Write X
0x4000 (16384) 0, 1, 2 SSC3 Parameter 8 byte Read/Write X
0x4001 (16385) 0, 1, 2, 3 SSC3 Configurartion 4 byte Read/Write X
0x4002 (16386) 0, 1, 2 SSC4 Parameter 8 byte Read/Write X
0x4003 (16387) 0, 1, 2, 3 SSC4 Configurartion 4 byte Read/Write X
Device Configuration
0x00B4 (180) 0, 1, 2 Output Type (vedere il capitolo 7.5.3) 2 byte Read/Write X
0x00F8 (248) 0, 1, 2 Diagnosis Suppression Configuration
(vedere il capitolo 7.5.4)
2 byte
Read/Write X
Condition Monitoring (monitoraggio dello stato)
0x0052 (82) 0, 1, 2, 3, 4, 5 Device Temperature (vedere il capitolo 7.5.5) 10 byte Read Only
0x0053 (83) 0, 1, 2 Temperature Thresholds
(vedere il capitolo 7.5.6)
4 byte Read/Write X
0x0057 (87) 0, 1, 2, 3 Operating Hours (vedere il capitolo 7.5.7) 12 byte Read Only
0x0058 (88) 0 Boot Cycle counter (vedere il capitolo 7.5.8) 4 byte Read Only
System Parameter
0x0003 (3) 0, 1, 2, 3, 4, 5 Data Storage (vedere il capitolo 7.5.9) 72 byte Read/Write
0x000C (12) 0 Device Access Locks
(vedere il capitolo 7.5.10)
2 byte Read/Write X
0x000D (13) 0, 1, 2, 3, 4 ProfileCharacteristic (vedere il capitolo 7.5.11) 8 byte Read Only
0x000E (14) 0, 1, 2, 3 PD Input Descriptor (vedere il capitolo 7.5.12) 9 byte Read Only
Tab. 7-6: Dati parametrici interfaccia IO-Link
BMP 01-ZLZPP _ 1A- _ _ _ _ -00 -P _ _ /P _ _ -S4/P _ _ -S75
Sensore di posizionamento lineare a campo magnetico