Balluff BMF 423K-AA C-2 Series, User Manual

Page: 29 / 116

www.balluff.com 13 english
Further data can be found at www.balluff.com
on the product page.
8.1 Ambient conditions
Ambient temperature −25…+85°C
Storage temperature −25…+85°C
Contamination scale 3
8.2 Detection range/Measuring range
Rated switching field strength
Hn
2.5 kA/m
Reproducibility 0.2 mm
8.3 Electrical data
Effective operating voltage
UeDC
24 V DC
Switching output load capacity 100 mA
Rated isolation voltage 75 V DC
Operating voltage Ub 10...30 V DC
Load capacitance ≤ 1 µF
No-load current Io undamped 2 mA
Switching frequency 500 Hz
Voltage drop static ≤ 1 V
8.4 Electrical connection
Bending radius, fixed routing ≥ 3 × cable diameter
Wire cross-section 0.07 mm
2
Cable length see Type code on
page 14
Cable diameter D 2.4 mm
Short circuit protected yes
Polarity reversal protected yes
Connection
…P0-S49
M8x1 male, 3-pin
…P0-S4 M12x1 male, 3-pin
…P0-S75 M 8x1 male, 4-pin
…SA95-_ _-S4 M12x1 male, 4-pin
…P0-00X Open cable end
8.5 Output / Interface
Switching output
BMF …AAPS… PNP Normally open
BMF …AAPO… PNP Normally closed
BMF …AANS… NPN Normally open
8.6 Materials
Housing material PA12
Clamping screw material Stainless steel
Jacket material PUR
8.7 Mechanical features
Dimensions 24 × 2.9 × 3.6 mm
Tightening torque 0.07 Nm
Installation Can be installed from
above in C-slot
8.8 Approvals and designations
The CE Mark verifies that our products
meet the requirements of the current EU
Directive.
Additional information on directives, approvals
and standards can be found at
www.balluff.com on the product page.
8
Technical data
BMF 423K-AA _ _ -C-2-…
Magnetic Field Sensors